Basic Electrical Energy Conversion – What You Need to Do
Before I get into the details of the basic electrical energy conversion, I want to make sure that you understand one basic fact. That fact is that electricity is made of three parts – negatively charged electrons, positively charged ions and electromagnetic radiation. All these parts can be changed into a fourth energy which is called quanta or quality. The amount of radiation is what changes the color of the electrons so in this basic electrical energy conversion we are dealing with two types of radiation i.e., ultraviolet and x-rays.
Now let us see how one goes about the basic electrical energy conversion process. The first step is to remove the electron from a conductor. How? The conductor is either coated or covered with a conductor which has a positive charge and a negative one. These different charges can be changed into one another using the help of a battery.
The next step in the basic electrical energy conversion is to convert the quanta into electric energy. This is done by passing them through electrodes which have holes at the center. The electrodes need to be of high resistance so that there is no pressure on them and so that the electric energy does not escape. In the end you will get a circuit that lets you convert the quanta into energy that you can use.
How do you go about this basic electrical energy conversion process? The first step is to set up a lab where you will test the conversion of quanta. You need a bench and several devices for which you will test the conversion of quanta. The first device is known as the cell which is used to measure the voltage across the cells. The other devices are the rectifier, meter reader and transformer.
The last step in the basic electrical energy conversion process is to install a generator. This is done by connecting one side of the generator to the negative. The other side of the generator is connected to the positive. The reason why you install a generator is that it helps to take away some of the stress from the system. It also provides power when the main power comes off.
That is all that you will need to do to start your electrical energy conversion. There are a few more steps that need to be taken and some research would be required but that is all. For a beginner you should be happy that this is not as complicated as it looks. There are a number of resources on the Internet that will help you understand how this system works. Once you get started you will be surprised with the results that you achieve.